ANTHEM Stereo Power Amplifier (STRPREAMPLIFIER)

$7,499.99

Push the Power of Audio Control.

The revolutionary STR Preamplifier is a new type of audio component that gives you more control and more refinements, including more connection options and more advanced technology, in a single, easy-to-use component.

Designed, engineered, and Crafted in Canada, the STR Preamplifier combines the benefits of an advanced preamp with the power of a processor, as well as functions like leading-edge DAC, onboard Anthem Room Correction (ARC®®), customizable bass manager for mono or stereo sub outs, MM and MC phono inputs—far more than the average preamplifier.

And it includes new generations of many of Anthem’s award-winning, audiophile-loving, review-praised digital signal processing innovations, delivering a noticeably higher level of audio performance realism.

The new STR Preamplifier drives all of your entertainment options today, and tomorrow.

PHONO PREAMPLIFIER
Input Impedance 100 Ω (MC), 47 kΩ || 270 pF (MM)
RIAA Response (20 Hz to 20 kHz) ± 0.1 dB
Gain (1 kHz, volume set to 0 dB) 61 dB (MC), 41 dB (MM)
DSP Mode
Maximum Input (at 1 kHz for < 0,01% THD 20 Hz – 20 kHz) 3.6 mV (MC), 38 mV (MM)
THD+N (at 1 kHz 20 Hz – 20 kHz BW, 2 Vrms output) < 0.02% (MC), < 0.003% (MM)
THD (at 1 kHz 20 Hz – 20 kHz BW, 2 Vrms output) 0.002% (MC), < 0.0015% (MM)
SNR (IEC-A, 2 Vrms output) 84 dB (MC), 102 dB (MM)
Direct Mode
Maximum Input Direct Mode (at 1 kHz for < 0,01% THD 20 Hz – 20 kHz) 11.8 mV (MC), 129 mV (MM)
THD+N (at 1 kHz 20 Hz – 20 kHz BW, 2 Vrms output) < 0.008% (MC), < 0.003% (MM)
THD (at 1 kHz 20 Hz – 20 kHz BW, 2 Vrms output) 0.002% (MC), < 0.0015% (MM)
SNR (IEC-A, 2 Vrms output) 92 dB (MC), 110 dB (MM)
PREAMPLIFIER
Frequency Response
digital-in, 192 kHz 10 Hz – 50 kHz (+0.00, -0.50 dB)
digital-in, 96 kHz 10 Hz – 45 kHz (+0.00, -0.50 dB)
digital-in, 44.1 kHz 10 Hz – 20 kHz (+0.00)
analog-in, DSP mode 10 Hz – 40 kHz (+0.02, -0.20 dB)
analog-in, direct mode 10 Hz – 80 kHz (+0.00, -0.10 dB)
THD+N (at 1 kHz, 20 Hz – 20 kHz BW, 2 Vrms output)
DSP Mode 0.001% Digital in, 0.0016% Analog in
Analog Direct Mode 0.0016%
SNR (at 1 kHz, IEC-A, 2 Vrms output)
DSP Mode 113 dB (digital-in), 108 dB (analog-in)
Analog Direct Mode 120 dB
Maximum Output ( <0.1% THD )
RCA connectors (direct and DSP modes) 3.3 Vrms
XLR connectors (direct and DSP modes) 6.6 Vrms
XLR Configuration Pin 1: Ground, Pin 2: Normal, Pin 3: Inverted
POWER REQUIREMENT
This product operates from a single phase AC power source that supplies between 90V and 264V at a frequency of 50 or 60 Hz.
POWER CONSUMPTION
Standby 0.38 W (120V), 0.45 W (240V)
Standby + Network 1.1 W (120V), 1.2 W (240V)
Typical Use 10 W
DIMENSIONS
Height 3-8/9” (9.93 cm)
Width 17” (43.2 cm)
Depth (not including power cord) 14-5/6” (37.69 cm)
Weight (unpacked) 16.8 lb (7.6 kg)
Brand

Type

Reviews

There are no reviews yet.

Be the first to review “ANTHEM Stereo Power Amplifier (STRPREAMPLIFIER)”

Check Availability

Use the form below to inquire about product availability in your area. Feel free to ask about any additional products or services that you may require.

Installation Quote

Use the form below to get a quote for custom installation. We may contact you for additional information if needed.