CLARION 4/3/2 Compact Amplifier (XC6440)

$440.00

Please contact us to check in-store availability.

Check Local Availability
XC6440
・ 600 Watts of Maximum Music Power
・ 125 Watts × 4 Continuous @ 2-Ohms
・ 85 Watts × 4 Continuous @ 4-Ohms
・ Independent Front / Rear Adjustable – 12dB/Oct. High/Low Pass Electronic Crossover, 50Hz-500Hz (×10, 500Hz – 5kHz)
・ Independent Front/Rear Bass Extender Control
・ BC2 Remote Subwoofer Level Control included
・ Soft Turn-On and Turn-Off Circuitry
・ Signal Sensing Remote Turn-On Circuit
・ Conformally Coated PC Board
・ Stainless Hardware
・ MOS-FET Power Supply
・ Ground Loop Isolation Circuit
・ Corrosion Resistant Nickel Plated RCA, Power, and Speaker Connections

Circuit Design Achieves High Quality Sound

Circuit Design Achieves High Quality Sound Clarion amplifiers feature uncompromising resistance to magnetic noise, thereby minimizing distortion, as well as high quality block terminals to offer low electrical and contact resistance. Easy subwoofer system configuration is possible with the embedded high pass and low pass filters. The result is high quality sound you can enjoy in a variety of systems.

Corrosion Resistant RCA and Block Terminals on all XC series Amplifiers

By utilizing corrosion resistant RCA and block terminals, XC series amplifiers offer improved durability and reliability in harsh environments. The XC series amplifiers are true marine amplifiers with oversized aluminum heatsinks and locking power terminals for the harsh marine conditions.

XC6440_02

MOS-FET Power Amp

There’ s only one way for Clarion’ s main units to deliver unyielding power output and linearity: MOS-FET amplification, or Metal Oxide Semiconductor Field Effect Transistor amplification. Smaller and more efficient than conventional power supplies, a MOS-FET amplification circuit delivers power with less distortion and zero On/Off switching noise. This means you can crank up the volume or set it to easy listening. Either way, your sound will be crystal clear.

2-Ohm Stability

Utilizing this design for peak performance and unwavering reliability, Clarion’ s amplifiers can drive lower impedance loads for increased power.

XC6440_03
CEA 2006 Power Ratings
150W × 4 RMS [2Ω @ ≤ 14.4V 1% THD+N]
85W × 4 RMS [4Ω @ ≤ 14.4V 1% THD+N]
S/N 89dB (Ref: 1W into 4Ω)

XC6440

Continuous Rated Power, 20Hz-20kHz, into 4 Ohms @ 14.4V, All Channels Driven 85W x 4
Typical Power in 2 Ohm Load, 20Hz-20kHz, @ 14.4V, All Channels Driven 125W x 4
Typical Power in 4-Ohm Bridged Mode, 20Hz-20kHz, @ 14.4V, All Channels Driven 250W x 2
Number of Channels 4/3/2
Power MOSFET Switching Transistors
2-Ohm Stable
Variable 12dB/Oct. Bass Boost
High/Low/Full Pass Crossover 50-500Hz (x10, 500-5kHz)
Corrosion Resistant Connectors; RCA/ Speaker/ Power
Dimensions (W × H × D) (Inches) 8-3/4 × 2-3/16 × 6-7/8

Additional information

Brand

Product Manual

https://www.clarion.com/ca/en/user-support/product-manuals/index.html?pdf=/ca/en/pdf/XC6440_OwnersManual.pdf

Reviews

There are no reviews yet.

Be the first to review “CLARION 4/3/2 Compact Amplifier (XC6440)”